1. Disconnect the ground cable from battery.
2. Remove the rear door trim. 
3. Remove the rear speaker.
4. Remove the sealing cover.
5. Remove the door sash and rear door glass.
6. Remove the rear door regulator and motor assembly.
7. Remove the rear door latch.
8. Remove the rear outer handle.
9. Remove the rear door weather strip.
NOTE:
If the weather strip clip is removed with excessive force, the weather strip may be damaged. Be sure to use clip remover to remove.
10. Remove the bolts and nuts to remove the door checker.
11. Pull the door harness connector inside the center pillar, then disconnect the connector.
12. Put a wooden block on jack and place jack under the rear door. Support the rear door with a jack to protect it from damage.
13. Remove the door-side bolts for upper and lower hinges to remove the rear door panel.
14. Remove the door hinge from vehicle.