LIGHTING SYSTEM > Spot Map Light

1. SPOT MAP LIGHT BULB

1. Visually check the bulb for blow out.

2. Check the bulb specification.

3. If NG, replace with a new bulb.

2. SPOT MAP LIGHT SWITCH

Measure the spot map light resistance.

Switch position	Terminal No.	Standard
OFF	—	1 MΩ or more
ON	1 and 2	1.5±0.5 Ω
Door	2 and 3	1.5±0.5 Ω

Replace the overhead console assembly if faulty.

3. OVERHEAD CONSOLE ILLUMINATION LIGHT BULB

NOTE:

Since LEDs (Light Emitting Diode) are used for the overhead console illumination light bulb, replace the overhead console assembly if the LED burns out.