1. Before checking the fog light beam level, be sure of the following:
• Check the area around the fog light for any scratches, damage or other types of deformation.
• Make sure that the vehicle is parked on a level surface.
• Make sure that the inflation pressure of tires are correct.
• Make sure that the vehicle’s fuel tank is full.
2. Bounce the vehicle several times to normalize the suspension.
3. Make certain that someone is seated in the driver’s seat.
4. Disengage the three clips, and then turn over the mud guard.
5. Adjust the front fog light pattern by inserting a Philips screwdriver to the adjusting hole.
|
(1) |
Adjusting hole |
|
(A) |
Vehicle center |
|
(B) |
Bulb center marking |
|
(C) |
3 m (10 ft) |
|
(D) |
Height of fog light center |
|
h mm (in) at 3 m (10 ft) |
|
60 (2.38) |