1. HEADLIGHT BEAM LEVELER ACTUATOR
1. Turn on the headlight.
2. Change the switch position in the order of 0 → 1 → 2 → 3 → 4 → 5, and check that the headlight beam position is lowered.
2. HEADLIGHT BEAM LEVELER SWITCH
Connect the circuit tester to the battery and headlight beam leveler switch connector. Measure the voltage at each switch position.
|
Switch position |
Terminal No. |
Standard |
|
0 |
6,7 (+) and battery (−) |
84 — 89% of battery voltage |
|
1 |
67 — 73% of battery voltage | |
|
2 |
51 — 57% of battery voltage | |
|
3 |
36 — 41% of battery voltage | |
|
4 |
21 — 26% of battery voltage | |
|
5 |
7 — 10% of battery voltage |
Replace the headlight beam leveler switch if faulty.