| CHECK BLOWER MOTOR POWER SUPPLY. |
|
1) Turn the ignition switch to OFF. 2) Install the blower motor relay. 3) Disconnect the blower motor connector. 4) Turn the ignition switch to ON. 5) Turn the blower switch to ON. 6) Use a tester to measure the voltage between the blower motor connector and chassis ground. Connector & terminal (B87) No. 2 — Chassis ground: |
| QUESTION | |
|
Is the voltage 10 V or more? | |
| Yes | No |
|
|
Repair or replace the harness between the blower motor relay and the blower motor. |
