| CHECK AIRBAG REAR HARNESS (SIDE AIRBAG HARNESS RH). |
|
1) Turn the ignition switch to OFF, disconnect the battery ground cable, and wait for 20 seconds or more. 2) Disconnect the airbag resistor from test harness. 3) Disconnect the connector (AB33) from curtain airbag module (RH). 4) Disconnect connector (AB24) from side airbag module (RH). 5) Disconnect the connector (AB26) from seat belt pretensioner. 6) Disconnect the connectors (AB6, AB17, and AB18) from the airbag control module. 7) Connect the test harness AG connector (1AG) to the connectors (AB6, AB17, and AB18). 8) Measure the resistance between the test harness AG connector (3AG) and the test harness Q connector (2Q). Connector & terminal (3AG) No. 19 — (2Q) No. 1: (3AG) No. 17 — (2Q) No. 2: |
| QUESTION | |
|
Is the resistance less than 10 Ω? | |
| Yes | No |
|
|
Replace the airbag rear harness along with body harness. |
