| CHECK LAP SEAT BELT PRETENSIONER. |
|
1) Turn the ignition switch to OFF, disconnect the battery ground cable, and wait for 20 seconds or more. 2) Disconnect the connector (AB30) from lap seat belt pretensioner (RH). 3) Connect the connector (1Q) in the test harness Q to connector (AB30). 4) Connect the airbag resistor to the connector (2Q) in the test harness Q. 5) Connect the battery ground terminal and turn the ignition switch to ON. |
| QUESTION | |
|
Does the airbag warning light illuminate for 6 seconds and go off? | |
| Yes | No |
|
Replace the lap seat belt pretensioner (RH). |
|
