| CHECK AIRBAG REAR HARNESS (BETWEEN AIRBAG CONTROL MODULE AND SATELLITE SAFING SENSOR). |
|
1) Turn the ignition switch to OFF, disconnect the battery ground cable, and wait for 20 seconds or more. 2) Disconnect the connectors (AB21, AB26) from seat belt pretensioner. 3) Disconnect the connectors (AB31, AB33) from curtain airbag module. 4) Disconnect the connector (AB30) from lap seat belt pretensioner (RH). 5) Disconnect the connectors (AB19), (AB20), (AB24) and (AB25) from the side airbag module. 6) Disconnect the connectors (AB17, AB6, AB18) from airbag control module. 7) Connect the connector (1AG) in the test harness AG to the connectors (AB17, AB6, AB18). 8) Disconnect the connector (AB41) from the satellite safing sensor and connect to the test harness H connector (1H). 9) Measure the resistance between connector (5AG) in the test harness AG and connector (3H) in the test harness H. Connector & terminal (5AG) No. 9 — (3H) No. 5: (5AG) No. 11 — (3H) No. 6: |
| QUESTION | |
|
Is the resistance less than 10 Ω? | |
| Yes | No |
|
|
Replace the airbag rear harness along with body harness. |
