| CHECK OUTPUT SIGNAL FROM TCM USING SUBARU SELECT MONITOR. |
|
1) Connect the connectors to TCM and transmission. 2) Connect the Subaru Select Monitor to the data link connector. 3) Turn the ignition switch to ON. 4) Run the Subaru Select Monitor. 5) Set the select lever to the “N” range, and fully close the throttle. (Vehicle speed is 0 km/h (0 MPH)) 6) Using Subaru Select Monitor, read the data of “Transfer Duty Ratio”. |
| QUESTION | |
|
Is the value approx. 5%? | |
| Yes | No |
|
|
|
