| CHECK TRANSFER DUTY SOLENOID (IN TRANSMISSION). |
|
1) Lift up the vehicle. 2) Drain the automatic transmission fluid. CAUTION: Do not drain ATF until it cools down. 3) Remove the extension case, and disconnect the connector from transfer duty solenoid. 4) Measure the resistance between transfer duty solenoid connector and transmission ground. Connector & terminal (AT2) No. 7 — Transmission ground: |
| QUESTION | |
|
Is the resistance 2.0 — 6.0 Ω? | |
| Yes | No |
|
|
Replace the control valve body. |
