| CHECK HARNESS BETWEEN ECM AND CLUTCH SWITCH. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connector from the ECM and the clutch switch. 3) Measure the resistance of harness between the ECM and clutch switch connector. Connector & terminal Gasoline engine model (B136) No. 25 — (B107) No. 2: Diesel engine model (B134) No. 28 — (B107) No. 2: |
| QUESTION | |
|
Is the resistance less than 0.5 Ω? | |
| Yes | No |
|
Repair the clutch switch power supply circuit. Or, replace the clutch switch. |
Repair the harness between the ECM and clutch switch connector. |
