| CHECK VDCCM&H/U POWER SUPPLY CIRCUIT. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the VDCCM&H/U connector. 3) Turn the ignition switch to ON. 4) Measure the voltage between VDCCM&H/U connector terminals. Connector & terminal (B310) No. 28 (+) — (B310) No. 25 (−): |
| QUESTION | |
|
Is the voltage 10 — 15 V? | |
| Yes | No |
|
|
Check the generator, battery and VDCCM&H/U power supply circuit. |
