| CHECK YAW RATE & LATERAL G SENSOR HARNESS. |
|
1) Disconnect the connector from the VDCCM&H/U. 2) Measure the resistance between VDCCM&H/U and yaw rate & lateral G sensor. Connector & terminal (B230) No. 3 — (B310) No. 10: (B230) No. 2 — (B310) No. 35: |
| QUESTION | |
|
Is the resistance less than 0.5 Ω? | |
| Yes | No |
|
|
Repair the harness between yaw rate & lateral G sensor and VDCCM&H/U. |
