| CHECK HARNESS BETWEEN ECM AND ELECTRONIC THROTTLE CONTROL. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connectors from the ECM. 3) Measure the resistance between ECM connectors. Connector & terminal (B134) No. 19 — (B134) No. 18: |
| QUESTION | |
|
Is the resistance 1 MΩ or more? | |
| Yes | No |
|
Repair poor contact of the electronic throttle control connector. Replace the electronic throttle control if defective. |
Repair the short circuit to power in the harness between ECM and electronic throttle control connector. |
