| CHECK HARNESS BETWEEN ECM AND OIL SWITCHING SOLENOID VALVE RH. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connectors from the ECM and oil switching solenoid valve RH. 3) Measure the voltage between ECM and chassis ground. Connector & terminal (B137) No. 25 (+) — Chassis ground (−): (B137) No. 24 (+) — Chassis ground (−): |
| QUESTION | |
|
Is the voltage less than 1 V? | |
| Yes | No |
|
|
Repair the short circuit to power supply in harness between ECM and oil switching solenoid valve RH connector. |
