| CHECK WIRING HARNESS. |
|
1) Disconnect the collation CM and push button ignition switch connector. 2) Using a tester, check continuity between the collation CM connector and push button ignition switch connector. Connector & terminal (B421) No. 8 — (B423) No. 9: (B421) No. 9 — (B423) No. 10: (B421) No. 30 — (B423) No. 14: (B421) No. 40 — (B423) No. 8: |
| QUESTION | |
|
Is there continuity? | |
| Yes | No |
|
|
Repair or replace the open circuit of harness. |
