| CHECK WIRING HARNESS. |
|
1) Disconnect the receiver connector and the collation CM connector. 2) Using a tester, check continuity between the receiver connector and collation CM connector. Connector & terminal (R296) No. 4 — (B421) No. 29: (R296) No. 5 — (B421) No. 38: (R296) No. 2 — (B421) No. 39: |
| QUESTION | |
|
Is there continuity? | |
| Yes | No |
|
|
Repair or replace the open circuit of harness. |
