| CHECK POWER SUPPLY CM. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connector of ECM. 3) Use a tester to measure the battery voltage in following procedures. (1) Press the push button ignition switch with the brake pedal depressed (MT model: clutch pedal depressed). (Measure within 10 seconds.) (2) Release the push button ignition switch from the condition of step 1. above. Connector & terminal (B420) No. 39 (+) — Chassis ground (−): |
| QUESTION | |
|
Does the value change from 1 V or less to +B-2 V or more in the step 1. above, and return to 1 V or less in the step 2. above? | |
| Yes | No |
|
Perform fault diagnosis for the engine system. |
Replace the power supply CM. |
