| CHECK GROUND CIRCUIT FOR ECM. |
|
1) Disconnect the connectors from the ECM. 2) Measure the resistance between ECM and chassis ground. Connector & terminal (B134) No. 5 — Chassis ground: (B137) No. 1 — Chassis ground: (B137) No. 2 — Chassis ground: (B137) No. 3 — Chassis ground: (B137) No. 7 — Chassis ground: |
| QUESTION | |
|
Is the resistance less than 5 Ω? | |
| Yes | No |
|
Repair the poor contact of the ECM connector. |
Repair the harness and connector. NOTE: In this case, repair the following item: • Open circuit of harness between ECM and engine ground • Poor contact of coupling connector |