| CHECK HARNESS BETWEEN ECM AND PURGE CONTROL SOLENOID VALVE. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connectors from ECM and purge control solenoid valve. 3) Turn the ignition switch to ON. 4) Measure the voltage between ECM and chassis ground. Connector & terminal (B137) No. 29 (+) — Chassis ground (−): |
| QUESTION | |
|
Is the voltage 10 V or more? | |
| Yes | No |
|
Repair the short circuit to power in the harness between the ECM and purge control solenoid valve connector. |
|
