| CHECK HARNESS BETWEEN ECM AND PURGE CONTROL SOLENOID VALVE 2. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connectors from ECM and purge control solenoid valve 2. 3) Measure the resistance between the purge control solenoid valve 2 connector and engine ground. Connector & terminal (E52) No. 2 — Engine ground: |
| QUESTION | |
|
Is the resistance 1 MΩ or more? | |
| Yes | No |
|
|
Repair the ground short circuit of harness between ECM and purge control solenoid valve 2 connector. |
