| CHECK ECM INPUT VOLTAGE. |
|
1) Depress the clutch pedal. 2) Turn the ignition switch to START. 3) Measure the voltage between ECM connector and chassis ground. Connector & terminal (B136) No. 32 (+) — Chassis ground (−): |
| QUESTION | |
|
Is the voltage 10 V or more? | |
| Yes | No |
|
Repair the harness and connector. NOTE: In this case, repair the following item: • Open circuit in harness between starter relay connector and starter motor • Poor contact of coupling connector |
Repair the open circuit in harness between ECM and ignition switch connector. |