CHECK INPUT SIGNAL FOR STARTER MOTOR.

1) Turn the ignition to OFF.

2) Disconnect the connector from starter motor.

3) Set the select lever in “P” range or “N” range (AT model), or the shift lever in neutral (MT model).

4) Press the push button ignition switch once with the brake pedal (AT model) or clutch pedal (MT model) depressed.

5) Measure the voltage between the starter motor connector and the engine ground.

Connector & terminal

(B14) No. 1 (+) — Engine ground (−):

QUESTION

Is the voltage 10 V or more?

Yes No

Check the starter motor.