| CHECK HARNESS BETWEEN ECM AND EGR VALVE CONNECTOR. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connectors from the ECM. 3) Measure the resistance between ECM and EGR valve connector. Connector & terminal DTC P1492; (B134) No. 14 — (E18) No. 6: DTC P1494; (B134) No. 24 — (E18) No. 1: DTC P1496; (B134) No. 13 — (E18) No. 4: DTC P1498; (B134) No. 23 — (E18) No. 3: |
| QUESTION | |
|
Is the resistance less than 1 Ω? | |
| Yes | No |
|
|
Repair the harness and connector. NOTE: In this case, repair the following item: • Open circuit in harness between ECM and EGR valve connector • Poor contact of coupling connector |
