| CHECK HARNESS BETWEEN ECM AND INTAKE CAMSHAFT POSITION SENSOR CONNECTOR. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connectors from the ECM. 3) Measure the resistance between the ECM and intake camshaft position sensor connector. Connector & terminal (B137) No. 13 — (E35) No. 2: (B134) No. 29 — (E35) No. 3: |
| QUESTION | |
|
Is the resistance less than 1 Ω? | |
| Yes | No |
|
|
Repair the harness and connector. NOTE: In this case, repair the following item: • Open circuit of the harness between the ECM and intake camshaft position sensor connector • Poor contact of coupling connector |
