| CHECK HARNESS BETWEEN ECM AND ELECTRONIC THROTTLE CONTROL RELAY. |
|
1) Disconnect the connectors from the ECM. 2) Turn the ignition switch to ON. 3) Measure the voltage between electronic throttle control relay connector and chassis ground. Connector & terminal LHD model with push button start (B220) No. 32 (+) — Chassis ground (−): Except for LHD model with push button start (B220) No. 31 (+) — Chassis ground (−): |
| QUESTION | |
|
Is the voltage 10 V or more? | |
| Yes | No |
|
Repair the short circuit to power in the harness between ECM and electronic throttle control relay. |
|
