| CHECK HARNESS BETWEEN ECM AND FUEL TEMPERATURE SENSOR CONNECTOR. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connector from ECM and fuel temperature sensor. 3) Measure the resistance of harness between ECM connector and fuel temperature sensor connector. Connector & terminal (B134) No. 48 — (E122) No. 1: (B134) No. 68 — (E122) No. 2: |
| QUESTION | |
|
Is the resistance less than 1 Ω? | |
| Yes | No |
|
|
Repair the harness and connector. NOTE: In this case, repair the following item: • Open circuit in harness between ECM connector and fuel temperature sensor connector • Poor contact of coupling connector |
