| CHECK COMBINATION METER. |
|
1) Turn the ignition switch to OFF. 2) Remove the combination meter. 3) Measure the resistance of combination meter. Terminals (i10) No. 2 — No. 19: |
| QUESTION | |
|
Is the resistance less than 10 Ω? | |
| Yes | No |
|
Repair the harness and connector. NOTE: In this case, repair the following item: • Open circuit of harness between combination meter and oil pressure switch • Poor contact in combination meter connector • Poor contact in oil pressure switch connector • Poor contact of coupling connector |
Repair or replace the combination meter. |
