| CHECK BODY INTEGRATED UNIT OUTPUT DATA. |
|
1) Prepare the Subaru Select Monitor kit. 2) Turn the ignition switch to ON (engine OFF) and run the “PC application for Subaru Select Monitor”. 3) On «System Selection Menu» display, select {Integ. unit mode}. 4) Select the {Current Data Display & Save}. 5) Select the {Illumination lamp O/P} and check the ON/OFF data. |
| QUESTION | |
|
Is it operating properly? | |
| Yes | No |
|
|
Follow the diagnosis procedures for the integrated unit. |
