| CHECK IGNITION SWITCH INPUT. |
|
1) Prepare the Subaru Select Monitor. 2) Turn the ignition switch to ON (engine OFF) and run the “PC application for Subaru Select Monitor”. 3) On «System Selection Menu» display, select {Integ. unit mode}. 4) Select the {Current Data Display & Save}. 5) Select the {BATT voltage (control)} and {IG power supply voltage}. |
| QUESTION | |
|
Is the voltage 0 V when ignition switch is OFF, 10 V or more when ignition switch is ON? | |
| Yes | No |
|
Ignition switch is normal. |
|
