| CHECK OUTPUT VOLTAGE BETWEEN HEADLIGHT BEAM LEVELER CONTROL MODULE AND VEHICLE HEIGHT SENSOR. |
|
1) Disconnect the vehicle height sensor connector. (front, rear) 2) Turn the ignition switch to ON. 3) Measure the voltage between the vehicle height sensor and chassis ground. Connector & terminal • Front vehicle height sensor: (F8) No. 3 (+) — Chassis ground (−): • Rear vehicle height sensor: (R29) No. 3 (+) — Chassis ground (−): |
| QUESTION | |
|
Is the voltage 5 V ±0.25 V? | |
| Yes | No |
|
|
|
